Product Description
(1) Liter Can - Requires Air Spray Mixer / Low Pressure Pot Gun to Properly DispenseDINITROL ML is an extremely penetrating product that will creep into gaps, overlaps and corroded areas and stop the corrosion from progressing.
Product Description s
DINITROL ML -The oil based brown coloured product is specially designed for applying into closed cavities such as doors, frame members and exterior joints and crevices. The product can be used for rust-proofing of second-hand cars, trucks, buses and other vehicles. Application temperature should be between 15 and 30°C.
Characteristics:
- Brown
- Extremely Penetrating
- Stops ongoing corrosion
- Water displacing
- Oily, flexible film
- Wet in wet with bitumen vehicle Underbody coating
Method of use:
DINITROL ML is applied by spraying with manual or semi-automatic.
DINITROL application equipment, and is suitable for either air-mixed or airless spraying.
- Type of film: oily, greasy
- Density at 23°C: 860 kg/m³
- Viscosity at 23°C, DIN 2: 60 s
- Dry matter content: 46 % by weight
- Flash point: 40°C
- Aromatic content in solvent: < 1 %
- Recommended film thickness wet: 30 μm
- Recommended layer thickness: 10 μm
- Drying time: 1 h
- Low temperature adhesion: < – 40°C
- Effect on car paint: none
- Removability: White Spirit
- Salt spray test: > 96 h
- Penetration 50 μm gap: > 70 mm
Other Details
YProduct Videos
Custom Field
Package Length 12.00
Package Width 6.00
Package Height 4.00
