Product Description
(4) 310ml tube/cartridges. Require cartridge style caulking gun to dispense.Polyurethane adhesive for auto windscreen direct glazing. Direct glazing applied cold adhesive. The black colored one component applied cold polyurethane adhesive is designed for the direct-glazing of automotive glasses. The product enables a 30 minute safe drive away once applied for customer convenience.
DINITROL 9100 provides good adhesion on paints with excellent working characteristics. The fast curing, low conductive, high elasticity, solvent and PVC free adhesive works on all vehicles whilst in ambient temperatures from -18 deg C to 45 deg C. Storage in closed packaging between 0 and 35 C.
*For complete instructions on how to use and apply the DINITROL glass bonding systems, please refer to the DINITROL AGR Training Manual.
*This product is a professional use product and should only be used by certified technicians. The seller highly recommends the buyer to use a professional auto glass installer for proper knowledge and use of this product. The buyer agrees to hold harmless seller and manufacturer for any liability with regard to the use and handling of this product. The buyer understands that by purchasing this product to use themselves without the use of a professional as recommend by the seller and manufacturer serious injury or death may result. *
Product Videos
Custom Field
Bullet Point 4 Fast Curing times Safe Drive Away Time -
Temperature Time - 0 F (-18 C) to 115 F (46 C) at RelativeHumidity 0 - 100% - 30 minutes Safe Drive Away Time
Bullet Point 5 (4) 310ml tube/cartridges. Require cartridge style caulking gun to dispense.
Package Length 10.00
Package Width 7.00
Package Height 5.00
Number of Items 4
Warranty 2 Years
Country of Manufacture Switzerland
Bullet Point 3 Method of use: The application of DINITROL 9100 requires power caulking gun or 26:1 thrust ratio to properly dispense. The use of this product is suitable only for experienced users. Pre-tests are recommended for special applications.
Bullet Point 2 Directions: This urethane requires DINITROL 538 PLUS Primer. All bonding areas must be clean, dry, and free from contaminants. The glass must be pretreated with either the 538 Plus primer or Activator Plus.
Bullet Point 1 Benefits: Excellent working, decking, and standing properties, fast curing, high modulus, low odor, low conductivity, high elasticity, solvent and PVC free - OEM approved - Crash test approved FMVSS 212 - ageing and weather resistant
