Product Description
Polyurethane adhesive for auto windscreen direct glazing. Direct glazing applied cold adhesive.The black colored one component applied cold polyurethane adhesive is designed for the direct-glazing of automotive glasses.
The product enables a 45min-1hr safe drive away once applied for customer convenience. DINITROL 9100 provides good adhesion on paints with excellent working characteristics. The fast curing, low conductive, high elasticity, OEM approved, and cold applied adhesive works on all vehicles whilst in ambient temperatures from -18 deg C to 45 deg C. Storage in closed packaging between 0 and 35 C.
*For complete instructions on how to use and apply the DINITROL glass bonding systems, please refer to the DINITROL AGR Training Manual.
*This product is a professional use product and should only be used by certified technicians. The seller highly recommends the buyer to use a professional auto glass installer for proper knowledge and use of this product. The buyer agrees to hold harmless seller and manufacturer for any liability with regard to the use and handling of this product. The buyer understands that by purchasing this product to use themselves without the use of a professional as recommend by the seller and manufacturer serious injury or death may result.*
Product Videos
Custom Field
Model Number D-9000
Bullet Point 5 (2) 310ml tube/cartridges. Require cartridge style caulking gun to dispense.
Bullet Point 4 Fast Curing times Safe Drive Away Time - 45min- 1hr depending on temperature and humidity - check description for exact cure times.
Bullet Point 3 Method of use: The application of DINITROL 9000 requires a power caulking gun or 26:1 thrust ratio to properly dispense the product. The use of this product is suitable only for experienced users. Pre-tests are recommended for special applications.
Bullet Point 2 Directions: This urethane requires DINITROL 538 PLUS Primer. All bonding areas must be clean, dry, and free from contaminants. The glass must be pretreated with either the 538 Plus primer or Activator Plus.
Bullet Point 1 Benefits: - High Modulus - Non-Conductive - Fast Curing - Cold Applied - OEM Approved - Meets Applicaable FMVSS
