Product Description
DINITROL 538 PLUS -10ml Single Application Primer Stick - Case (12 Pack)One-step primer for use with all DINITROL polyurethane adhesives - Base material - Isocyanates and soot in solvents
The primer DINITROL 538 PLUS is a “one-step primer” with additional functions for glass bonding with polyurethanes. It is a primer developed as a pretreatment for the replacement of polyurethane direct glass automotive parts and other substrates. DINITROL 538 PLUS is a solvent-based, physically and chemically drying black primer that promotes adhesion between the glass/ceramic surface and the glass adhesive and provides UV protection.
» Pretreatment of RIM and paints
» Long life primer (no reaction within 3 months)
» Inhibits rust in small nicks and scratches
» Compatible with all DINITROL adhesive systems
»Application temperature + 5 C – 40 C - Application method felt / brush
»Drying time > 5 min *
Adhesion with direct glazing Polyurethanes on glass-frit:
• with activator - good
• without activator - good
Shelf life 12 months
Important Note: Due to its reactivity with moisture, the primer has to be used within 1 week after bottle has been opened (if properly sealed). DINITROL 538 plus should not be used if the product has remained opened for an extended amount of time. Replace inner seal and cap tightly and immediately after each use to ensure maximum shelf life.
Product Videos
Custom Field
Bullet Point 1 Benefits: - One-step glass-fit primer for ceramic coating - Pretreatment of RIM and paints - Long life primer (no reaction within 3 months) - Inhibits rust in small nicks and scratches - Compatible with all DINITROL adhesive systems
Bullet Point 2 Promotes adhesion between the glass/ceramic surface and the glass adhesive and provides UV protection.
Bullet Point 3 Application: Before use of the primer, shake the bottle thoroughly, mix for an additional one minute. The application of the primer DINITROL 538 plus can be done manually by felt and/or an adequate tool. Work in a well ventilated area.
Bullet Point 4 Application temperature 5 C – 40 C - Application method felt / brush » Drying time > 5 min *
Bullet Point 5 (12) 10ml Single Application Primer Sticks with Angled Applicator - Please note: This product is suitable for experienced professional users only.
Model Number 538 Plus
Package Weight 0.00
Package Length 7.00
Package Width 4.00
Package Height 3.00
Warranty 2 Years
Country of Manufacture Switzerland
